LOOP-POWER SOUNDER VISUAL INDICATOR A9092T

Features

Meet EN54-3;
Designed with an upper cover and a lower cover and installed on an independent base, it can be installed, debugged and maintained conveniently;
Suitable for wall and ceiling mount application；
Suitable for wall and ceiling mount application.

Intelligent loop-power Sounder Visual Indicator A9092T can be audible after being connected to a bus loop. It can be used with a bus-type fire alarm control panel. After receiving a start command given by the fire alarm control panel following an accident, the Sounder Beacon will begin to work. At this moment, the Sounder Beacon will give a harsh audible alarm signal, to remind the people on the scene of the accident, the fact that a fire has occurred on the site, quickly and necessity to take related evacuation measures, thus preventing the fire accident from becoming a major one.

The loop-power Sounder Visual Indicator A9092T may be used to give audible alarms at the scenes of accidents. It is applicable to places like high-rise residential buildings, public places, hotels, amusement buildings, factories, shopping centers, hospitals, schools, office buildings and stock exchanges, and particularly to the places with a low visibility or the possibility of generation of smoke.

Table:Sound Level Data(EN54-3 approved)

Tone1:667Hz-2000Hz@0.21Hz,Max Volume,dB(A)@1m

Angle	Horizontal		Vertical
Voltage	20V	28V	20V	28V
15°	81.2	84.9	81.0	84.6
45°	77.0	80.0	75.0	78.0
75°	83.8	86.9	83.0	86.6
105°	83.5	86.6	83.0	85.7
135°	77.4	80.1	75.3	78.7
165°	80.7	83.2	79.2	82.9

Loop input	DC24V(20-28V),≤2mA(monitoring status),≤ 8mA(alarm status)
Power consumption	≤0.2W@DC24V
Sound Level	See the table”Sound Level Data” in description tab
Flash Color	Red
Ingress Protection Rating	IP21C
Operating Temperature	-10℃ ~ +55℃
Relative Humidity	≤95%, non condensing
Material of Lens/Body	Flame retardant PC/ABS
Dimension	ф100mm×100.5mm( with the base)
Mounting Hole Spacing	45mm ~ 70mm
Weight	About 236 g (with the base)